The Times Australia
The Times World News

.

Robodebt not only broke the laws of the land – it also broke laws of mathematics

  • Written by Noel Cressie, Distinguished Professor of Statistics, University of Wollongong
Robodebt not only broke the laws of the land – it also broke laws of mathematics

Friday marked the end of the public hearings for the Royal Commission into the Robodebt Scheme. They painted a picture of a catastrophic program that was legally and ethically indefensible[1] – an example of how technological overreach, coupled with dereliction of duty can amount to immense suffering for ordinary people.

The artificial intelligence (AI) algorithm behind Robodebt has been called “flawed”. But it was worse than that; it broke laws of mathematics. A mathematical law called Jensen’s inequality shows the Robodebt algorithm should have generated not only debts, but also credits.

What was Robodebt?

The Australian government’s Robodebt program was designed to catch people exploiting the Centrelink welfare system.

The system compared welfare recipients’ Centrelink-reported fortnightly income with their ATO-reported yearly income, the latter of which was averaged to provide fortnightly figures that could be lined up with Centrelink’s system.

If the difference showed an overpayment by Centrelink, a red flag was raised. The AI system then issued a debt notice and put the onus on the recipient to prove they weren’t exploiting the welfare system.

A Robodebt victim

To understand the extent of the failure, let’s consider a hypothetical case study. Will Gossett was a university student from 2017-2019. He was single, older than 18, and living at home with his parents.

Will received Centrelink payments according to his fortnightly income from a couple of casual jobs with highly variable work hours. In his first year at university his jobs didn’t pay much, so he received more Centrelink payments in the 2018 financial year than the year following.

The Robodebt algorithm took Will’s ATO yearly income records for both the 2018 and 2019 financial years and, for each year, averaged them into a series of fortnightly “robo” incomes.

Inside Robodebt’s AI world, his fortnightly incomes were then the same throughout the 2018 financial year, and the same throughout the 2019 financial year.

Will was honest with his claims, but was stunned to receive a debt notice for Centrelink overpayments made in the 2019 financial year – the year in which he actually received lower welfare payments.

The income-averaging algorithm gave Will an average fortnightly income for 2019 that was above the threshold that made him eligible for Centrelink payments. As far as the Robodebt system was concerned, Will shouldn’t have received any welfare payments that year.

Read more: 'Amateurish, rushed and disastrous': royal commission exposes robodebt as ethically indefensible policy targeting vulnerable people[2]

Jensen’s inequality

The laws of mathematics tell us when two things are equal, but they can also tell us when one thing is bigger than another. This type of law is called an “inequality”.

To understand why and when Robodebt failed for Will, we need to understand a concept called Jensen’s inequality, credited to Danish mathematician Johan Jensen (1859-1925).

Jensen’s inequality explains how making a decision based on the averaging of numbers leads to either a negative bias or a positive bias under a “convexity condition”, which I’ll explain soon.

You’ll recall Will is a single university student, above 18, and living with his parents. Based on these factors, Centrelink has a fortnightly payment table for him, illustrated with the curve in the figure below.

The figure shows the more income Will earns from his jobs, the less welfare payment he receives, until a specific income, after which he receives none.

This graph, created from tables provided by Centrelink, shows how certain factors determine the amount of welfare payments Will can receive depending on his income.

The parts of the curve where Jensen’s inequality is relevant are highlighted by two red squares. In the square on the left, the curve bends downwards (concave), and in the square on the right it bends upwards (convex).

Because Will’s income was higher in 2019 and spread across the part where the payment curve is convex, Jensen’s inequality guarantees he would receive a Robodebt notice, even though there was no debt.

In 2018, however, Will’s income distribution was spread around smaller amounts where the curve is concave. So if Jensen’s inequality was adhered to, the AI algorithm should have issued him a “Robocredit” – but it didn’t.

It could be the algorithm contained a line of code that nullified Jensen’s inequality by instructing any credits be ignored.

Big data and a bad algorithm

The people responsible for the Robodebt system should have had a strong interest in keeping error rates low. Data scientists have a big red “stop” button when error rates of automated systems go beyond a few percent.

It’s straightforward to estimate error rates for an AI scheme. Experts do this by running simulations inside a virtual model called a “digital twin”. These can be used to carry out statistical evaluations, and expose conscious and unconscious biases in bad algorithms.

In Robodebt’s case, a digital twin could have been used to figure out error rates. This would have required running the Robodebt algorithm through representative incomes simulated under two different scenarios.

Under the first scenario, incomes are simulated assuming no debt is owed by anyone. Every time a result is returned saying a debt is owed, a Type 1 (or false-positive) error is recorded. Under the second scenario, incomes are simulated assuming everyone owes a debt (to varying degrees). If a no-debt result is returned, a Type 2 (false-negative) error rate is recorded.

Then an error rate is estimated by dividing the number of errors by the number of simulations, within each scenario.

Eye-watering inaccuracies

Although no consistently reliable error rates have been published for Robodebt, a figure of[3] at least 27% was quoted in Parliament Question Time on February 7.

The reality was probably much worse. During the scheme, on the order of one million income reviews were performed, of which 81% led[4] to a debt being raised.

Of these, about 70%[5] (roughly 567,000 debts) were raised through the use of income averaging in the Robodebt algorithm.

In 2020, the government conceded[6] about 470,000 debts had been falsely raised, out of a total of about 567,000.

Back-of-the-envelope calculations give a Type 1 (false-positive) error rate on the order of 80% (470,000/567,000). Compared to the usual target of a few percent, this is an eye-wateringly large error rate.

If simulations had been run, or human intelligence used to check real cases, the “stop” button would have been hit almost immediately.

Jensen’s inequality establishes why and when income averaging will fail, yet income matching hasn’t gone away. It can be found in AI software used for official statistics, welfare programs, bank loans and so forth.

Deeper statistical theory for this “change of support” problem — for example, going from data on yearly support to fortnightly support — will be needed as AI becomes increasingly pervasive in essential parts of society.

Read more: Why robodebt's use of 'income averaging' lacked basic common sense[7]

Read more https://theconversation.com/robodebt-not-only-broke-the-laws-of-the-land-it-also-broke-laws-of-mathematics-201299

Times Magazine

Headless CMS in Digital Twins and 3D Product Experiences

Image by freepik As the metaverse becomes more advanced and accessible, it's clear that multiple sectors will use digital twins and 3D product experiences to visualize, connect, and streamline efforts better. A digital twin is a virtual replica of ...

The Decline of Hyper-Casual: How Mid-Core Mobile Games Took Over in 2025

In recent years, the mobile gaming landscape has undergone a significant transformation, with mid-core mobile games emerging as the dominant force in app stores by 2025. This shift is underpinned by changing user habits and evolving monetization tr...

Understanding ITIL 4 and PRINCE2 Project Management Synergy

Key Highlights ITIL 4 focuses on IT service management, emphasising continual improvement and value creation through modern digital transformation approaches. PRINCE2 project management supports systematic planning and execution of projects wit...

What AI Adoption Means for the Future of Workplace Risk Management

Image by freepik As industrial operations become more complex and fast-paced, the risks faced by workers and employers alike continue to grow. Traditional safety models—reliant on manual oversight, reactive investigations, and standardised checklist...

From Beach Bops to Alpine Anthems: Your Sonos Survival Guide for a Long Weekend Escape

Alright, fellow adventurers and relaxation enthusiasts! So, you've packed your bags, charged your devices, and mentally prepared for that glorious King's Birthday long weekend. But hold on, are you really ready? Because a true long weekend warrior kn...

Effective Commercial Pest Control Solutions for a Safer Workplace

Keeping a workplace clean, safe, and free from pests is essential for maintaining productivity, protecting employee health, and upholding a company's reputation. Pests pose health risks, can cause structural damage, and can lead to serious legal an...

The Times Features

Distressed by all the bad news? Here’s how to stay informed but still look after yourself

If you’re feeling like the news is particularly bad at the moment, you’re not alone. But many of us can’t look away – and don’t want to. Engaging with news can help us make ...

The Role of Your GP in Creating a Chronic Disease Management Plan That Works

Living with a long-term condition, whether that is diabetes, asthma, arthritis or heart disease, means making hundreds of small decisions every day. You plan your diet against m...

Troubleshooting Flickering Lights: A Comprehensive Guide for Homeowners

Image by rawpixel.com on Freepik Effectively addressing flickering lights in your home is more than just a matter of convenience; it's a pivotal aspect of both home safety and en...

My shins hurt after running. Could it be shin splints?

If you’ve started running for the first time, started again after a break, or your workout is more intense, you might have felt it. A dull, nagging ache down your shins after...

Metal Roof Replacement Cost Per Square Metre in 2025: A Comprehensive Guide for Australian Homeowners

In recent years, the trend of installing metal roofs has surged across Australia. With their reputation for being both robust and visually appealing, it's easy to understand thei...

Why You’re Always Adjusting Your Bra — and What to Do Instead

Image by freepik It starts with a gentle tug, then a subtle shift, and before you know it, you're adjusting your bra again — in the middle of work, at dinner, even on the couch. I...