The Times Australia
The Times World News

.

green hydrogen plants next to green steelworks to boost efficiency and kickstart both industries

  • Written by Changlong Wang, Research fellow, Monash University
green hydrogen plants next to green steelworks to boost efficiency and kickstart both industries

The race to net zero is accelerating. Just last week, United States President Joe Biden and Australian Prime Minister Anthony Albanese unveiled a climate pact[1] to boost cooperation. The move signifies Australia is becoming a global leader in the renewable energy roll-out and critical mineral supply.

Australia’s rich iron ore deposits and cheap solar offer yet another way we can lead. If we locate green hydrogen plants near green steel facilities, we can shift the highly polluting steel industry away from fossil fuels.

Our new research[2] shows co-locating plants in sun-rich, iron-rich places like Western Australia’s Pilbara and South Australia’s Eyre Peninsula can help overcome the “first mover problem” for green hydrogen: you can’t have a hydrogen industry without buyers for it and can’t have buyers without hydrogen.

How would it work? Cheap solar power would be used to crack water into hydrogen and oxygen. This green hydrogen would be piped a short distance to a green steel plant, which uses hydrogen and electricity to produce iron from the ore, and then an electric arc furnace to smelt steel.

As we grapple with ways to decarbonise the steel sector, which uses 8% of the world’s energy and produces 7% of all energy-related carbon emissions, we should urgently look for opportunities like this. As a bonus, cheap power from solar and wind could make Australian-made iron and steel more competitive globally.

steelmaking
Making iron and steel is enormously energy intensive. Shutterstock

Why is Australia so well placed?

We’re the world’s largest iron ore exporter. Under our red dirt lies an estimated 56 billion tonnes of iron ore, as of 2021. Export earnings reached A$133 billion in 2021–22. We also profit from the current emissions-heavy way of making steel, by exporting $72 billion worth of metallurgical coal.

Australia’s potential as a green hydrogen provider is often promoted. This year’s federal budget allocated $2 billion to help make[3] it a reality. But our distance from the rest of the world makes pipelines prohibitively expensive, and shipping hydrogen is difficult.

Read more: Cooperation with the US could drive Australia’s clean energy shift – but we must act fast[4]

One solution is to use it here. Green hydrogen could make it possible to onshore more iron and steel production.

Clean steelmaking will bring major change to our iron ore exports if other countries take it up. Traditionally, 96% of our exports are the most common type of ore, hematite. But this is currently not suited to green steelmaking.

By contrast, magnetite ore only accounts for 4% of exports but can be used in hydrogen-based green steelmaking.

magnetite Right now, magnetite is a tiny part of our iron ore exports - but that could change. Shutterstock

Australia has vast reserves of magnetite ore, which previously hasn’t been in as much demand. But these ore bodies will become valuable under the right economic conditions.

And while we can solve steel’s carbon problem with much better recycling of this valuable material, we’ll still need new steel equivalent to about 50%[5] of the current rate of production in 2050, due to issues with converting scrap to reusable steel and removing contaminants.

Where should we co-locate these plants?

Major iron ore centres in the Pilbara and Eyre Peninsula already have ports, a workforce and other infrastructure. That makes them the logical first choice to co-locate solar, wind and hydrogen with iron and steelmaking.

We modelled what would happen if these sites expanded wind and solar power to make hydrogen and found the cost of green steel could drop substantially to around $900 per tonne by 2030 and $750 per tonne by 2050.

Read more: Red dirt, yellow sun, green steel: how Australia could benefit from a global shift to emissions-free steel[6]

By exporting green iron and steel, Australia could boost trade value, reduce global greenhouse emissions, and link our exports with global decarbonisation efforts. Steel will become even more important given it’s so vital to manufacturing solar and wind.

There’s a strong correlation between potential hydrogen hubs and current and future iron ore operations.

Our recent modelling[7] has found key benefits in linking hydrogen hubs and future iron ore operations.

First, it avoids the problem of transporting hydrogen, which, especially in liquid form, can be expensive and energy-intensive to transport.

And second, co-locating green hydrogen gives an immediate boost to the industry. At present, green hydrogen is at the early stage before increased scale and knowledge drives costs down.

To compete with coking coal, green hydrogen must get cheaper. Part of this will come from falling renewable energy prices, better electrolysers to make hydrogen, and carbon pricing. But part of it will be locating hydrogen production where it can be used.

eyre peninsula map South Australia’s Eyre Peninsula is one of the best spots to co-locate green steel and hydrogen. Shutterstock

Choosing a site is the most important consideration. While access to infrastructure and cheap ore are important, the cost of green steel largely depends on low-cost hydrogen and cheap renewables.

Australia’s state and federal governments are backing hydrogen as an industry of the future. To go from paper to reality will require policy incentives, low-interest loans, research and development funding, and investment in infrastructure.

Policies to boost renewable energy and develop the hydrogen economy will create a more conducive environment for green steel production.

If we combine our wealth of solar, hydrogen and iron ore, we can help make global steel production green, and also create the conditions for a green hydrogen export industry.

Read more: Australia's main iron ore exports may not work with green steelmaking. Here's what we must do to prepare[8]

Read more https://theconversation.com/picture-this-green-hydrogen-plants-next-to-green-steelworks-to-boost-efficiency-and-kickstart-both-industries-205845

Times Magazine

DIY Is In: How Aussie Parents Are Redefining Birthday Parties

When planning his daughter’s birthday, Rich opted for a DIY approach, inspired by her love for drawing maps and giving clues. Their weekend tradition of hiding treats at home sparked the idea, and with a pirate ship playground already chosen as t...

When Touchscreens Turn Temperamental: What to Do Before You Panic

When your touchscreen starts acting up, ignoring taps, registering phantom touches, or freezing entirely, it can feel like your entire setup is falling apart. Before you rush to replace the device, it’s worth taking a deep breath and exploring what c...

Why Social Media Marketing Matters for Businesses in Australia

Today social media is a big part of daily life. All over Australia people use Facebook, Instagram, TikTok , LinkedIn and Twitter to stay connected, share updates and find new ideas. For businesses this means a great chance to reach new customers and...

Building an AI-First Culture in Your Company

AI isn't just something to think about anymore - it's becoming part of how we live and work, whether we like it or not. At the office, it definitely helps us move faster. But here's the thing: just using tools like ChatGPT or plugging AI into your wo...

Data Management Isn't Just About Tech—Here’s Why It’s a Human Problem Too

Photo by Kevin Kuby Manuel O. Diaz Jr.We live in a world drowning in data. Every click, swipe, medical scan, and financial transaction generates information, so much that managing it all has become one of the biggest challenges of our digital age. Bu...

Headless CMS in Digital Twins and 3D Product Experiences

Image by freepik As the metaverse becomes more advanced and accessible, it's clear that multiple sectors will use digital twins and 3D product experiences to visualize, connect, and streamline efforts better. A digital twin is a virtual replica of ...

The Times Features

How to Choose a Cosmetic Clinic That Aligns With Your Aesthetic Goals

Clinics that align with your goals prioritise subtlety, safety, and client input Strong results come from experience, not trends or treatment bundles A proper consultation fe...

7 Non-Invasive Options That Can Subtly Enhance Your Features

Non-invasive treatments can refresh your appearance with minimal downtime Options range from anti-wrinkle treatments to advanced skin therapies Many results appear gradually ...

What is creatine? What does the science say about its claims to build muscle and boost brain health?

If you’ve walked down the wellness aisle at your local supermarket recently, or scrolled the latest wellness trends on social media, you’ve likely heard about creatine. Creati...

Whole House Water Filters: Essential or Optional for Australian Homes?

Access to clean, safe water is something most Australians take for granted—but the reality can be more complex. Our country’s unique climate, frequent droughts, and occasional ...

How Businesses Turn Data into Actionable Insights

In today's digital landscape, businesses are drowning in data yet thirsting for meaningful direction. The challenge isn't collecting information—it's knowing how to turn data i...

Why Mobile Allied Therapy Services Are Essential in Post-Hospital Recovery

Mobile allied health services matter more than ever under recent NDIA travel funding cuts. A quiet but critical shift is unfolding in Australia’s healthcare landscape. Mobile all...